Description
After replaced air bag diagnosis sensor unit, it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.
Work Procedure
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to Removal & Installation.
>>
GO TO 2.
WRITING vehicle SPECIFICATION
Perform configuration for air bag diagnosis sensor unit. Refer to Description.
>>
WORK END
Other materials
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Horn and Light Function Does Not Operate
Description
Horn and light do not operate when the owner uses telematics function of the smartphone.
Diagnosis Procedure
CHECK TELEMATICS SYSTEM SYMPTOM TABLE
Check telematics system symptom table.
>>
GO TO 2.
CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)
Press the LOCK butto ...
Additional Service When Replacing Power Window Motor
Description
When each power window motor replaced, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.CAUTION:
The following specified operations cannot be performed under the non-initialized condition.
Auto-up operation
Anti-pinch function
Wo ...