Nissan Armada 2025-2026 Service and Repair Manual: Configuration (a/c Auto Amp.)
Vehicle specification needs to be written with CONSULT because it is not written after replacing the A/C auto amp.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the A/C auto amp.
Refer to Work Procedure.
NOTE:
The configuration no need to “save” configuration data from the A/C auto amp. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
Complete the procedure of “Configuration” in order.
If incorrect “Configuration”, incidents might occur.
Work Procedure
REPLACE A/C AUTO AMP.
Replace A/C auto amp. Refer to Removal and Installation.
>>
GO TO 2.
WRITING Vehicle SPECIFICATION
Perform configuration (HVAC). Refer to Description.
>>
WORK END ...
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to A/C auto amp. following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual ...
Other materials:
Symptom Table
INTELLIGENT TRACE CONTROL
Perform self-diagnosis using CONSULT before the symptom diagnosis. Perform trouble diagnosis if any DTC is detected. Refer to DTC Index.
Symptom Possible cause Inspection item Intelligent trace control inoperative/ineffective No intelligent trace control assist Intell ...
Door Does Not Lock/unlock and Engine Does Not Start (all I-Key/req Sw/push Sw)
All doors do not lock/unlock using door request switch and engine does not start when push-button ignition switch is pressed while carrying Intelligent Key.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
Door lock operation (remote keyless entry) Door lock operation (one touch sensor ...
Exploded View
Reservoir cap Electrical brake control unit Bracket Caution label Gasket Spacer : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) : Always replace after every disassembly. ...
0.005