Vehicle specification needs to be written with CONSULT because it is not written after replacing the IPDM E/R.
CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the IPDM E/R. For details, refer to Work Procedure.
NOTE:
For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure
Work ProcedureHydraulic Piping
Front disc brake Connector ABS actuator and electric unit (control unit) Electrical brake control unit Rear disc brake Brake hose Brake tube : Flare nut : Union bolt ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Brake system
Braking precautions
The brake system in the Nissan Armada is engineered with dual independent hydraulic
circuits to enhance safety. This design ensures that even if one circuit fails,
braking capability is still maintained on two wheels, allowing the driver to retain
a level of control in eme ...