Removal and Installation
REMOVAL
Apply protective tapes (A) on the part to protect it from damage.
Disengage fixing pawls and peel off double-sided tapes using a remover tool (A), and then remove front fender duct 
.
 |
: Pawl |
Remove double-sided tape with a double-sided tapes remover from front fender duct and front fender assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse double-sided tape. Always replace it with a new one when it is removed.
NOTE:
-
The following table shows the specified values for checking normal installation status.
-
Fitting adjustment cannot be performed.
|
Front fender assembly |  |
Front fender duct |
Unit: mm [in]
| Portion | Standard | |||
|---|---|---|---|---|
| Front fender assembly – Front fender duct |  – |
D | Surface height |
1.0 ± 1.0 [0.039 ± 0.039] |
| E | Clearance |
0.5 ± 0.5 [0.020 ± 0.020] |
||
 – |
F | Surface height |
1.0 ± 1.0 [0.039 ± 0.039] |
|
| G | Clearance |
0.5 ± 0.5 [0.020 ± 0.020] |
||
 – |
H | Surface height |
1.0 ± 1.0 [0.039 ± 0.039] |
|
| I | Clearance |
0.5 ± 0.5 [0.020 ± 0.020] |
||
Other materials
Drive Belt Auto Tensioner and Idler Pulley
Exploded View
Idler pulley
Drive belt auto-tensioner
: N·m (kg-m, ft-lb)
: vehicle front
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. ...
Seat Lifting
Diagnosis Procedure
CHECK LIFTING MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CH ...
Without Automatic Drive Positioner
Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check the following items.
Damage, deformation and foreign matter pinching of the door mirror mechanism.
Damage of harness due to rubbing and pinching.
Interference with other components.
Installed incorrectly.
Is the inspection result normal ...