Inspection
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
COMPONENT PART
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
-
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
Axial end play : Refer to Wheel Bearing. -
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.
Other materials
Front Suspension Tools and Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
ST35652000
( − )
Shock absorber attachment
Disassembling and assembling shock absorber
ST3127S000
(NI-25765-A) ...
Driver Air Bag Module
Exploded View
Steering wheel
Driver air bag module
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discha ...
Intelligent Key Warning Buzzer
Removal and Installation
REMOVALDisconnect Intelligent Key warning buzzer harness connector.
Disengage clip of frame, and then remove Intelligent Key warning buzzer .
: Clip
INSTALLATIONInstall in the reverse order of removal. ...