Description
Automatic back door open/close function does not operate properly when using hands free sensor.
Diagnosis Procedure
CHECK OPERATION WITH PROPER KICK
Check that proper operating conditions have been met for hands free sensor operation. Refer to System Description. Perform kick with proper form.
Is the system operational?
YES>>Instruct customer how to kick with proper form.
NO>>GO TO 2.
CHECK OPERATION OF THE AUTOMATIC BACK DOOR WITH OTHER TRIGGERS
Check if automatic back door works with Intelligent Key, back door opener switch, and automatic back door switch.
Is the system operational?
YES>>GO TO 3.
NO>>Perform diagnosis for automatic back door system. Refer to Work Flow.
CHECK vehicle EQUIPMENT
-
Check to see if the vehicle is equipped with a trailer hitch.
-
Use EPC parts catalog to confirm that the correct hands free sensor control unit part number is installed for Nissan Armada vehicles equipped with/without a trailer hitch.
Is the correct hands free sensor control unit installed?
YES>>GO TO 4.
NO>>Replace hands free sensor control unit. Refer to Removal and Installation.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Perform trouble diagnosis relevant to DTC indicated. If DTC exists for automatic back door control unit and hands free sensor, address automatic back door control unit DTC first.
CHECK FOR WIRING OR SENSOR DAMAGE
Remove any bumper undercover, if necessary. Clean off hands free sensor assembly of dirt, dust, etc. Check entire hands free sensor assembly to see if any wiring, connectors, or sensors are damaged.
Is there any issue with wiring, connectors, or sensors?
YES>>Replace damaged wiring, connector, or sensor. Refer toDiagnosis Procedure.
NO>>GO TO 6.
CHECK POWER SUPPLY AND GROUND CIRCUIT-1
Check hands free control unit power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 7.
NO>>Repair or replace the malfunctioning parts.
CHECK HANDS FREE SENSOR SIGNAL
Check hands free sensor signal. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 8.
NO>>Replace fuse if necessary. Refer to Diagnosis Procedure.
CHECK POWER SUPPLY AND GROUND CIRCUIT-2
Check automatic back door control unit power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace hands free sensor. Refer to Exploded View.
NO>>Replace hands free sensor control unit. Refer to Removal and Installation.
Other materials
Warning/indicator lights (red)
Brake warning light
or
In the Nissan Armada, the brake warning light is a critical safety indicator
that helps monitor the condition of the braking system. When the ignition switch
is turned to the ON position, this light should illuminate briefly for a few seconds
and then turn off, ...
Wireless Charger Unit
Removal and Installation
REMOVALRemove the front center console cup holder assembly. Refer to Removal and Installation.
Remove the center console pocket mat. Refer to Exploded View.
Press the wireless charger unit pawl from the back of the front center console cup holder assembly to remove the wirel ...
Normal Operating Condition
Description
PRECAUTIONS FOR I-FCWRefer to Precautions for Intelligent Forward Collision Warning.PRECAUTIONS FOR LDWRefer to Precautions for Lane Departure Warning.PRECAUTIONS FOR I-LIRefer to Precautions for Intelligent Lane Intervention.PRECAUTIONS FOR BSWRefer to Precautions for Blind Spot Warning ...