Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER INSTALLATION
Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
Check accelerator pedal securely returns to the fully released position.
NOTE:For the electrical inspection of accelerator pedal position sensor. Refer to Component Inspection.
Removal and Installation
REMOVAL
CAUTION:
Never disassemble accelerator pedal assembly.
Never remove accelerator pedal position sensor from accelerator pedal assembly.
Avoid impact from dropping etc. during handling.
Be care ...
Other materials:
Disassembly and Assembly
WHEEL SIDE
Disassembly
Fix shaft with a vise.
CAUTION:
Protect shaft when fixing with a vise using aluminum or copper plates.
Remove dust shield from joint sub-assembly.
Remove boot bands and then remove boot from joint sub-assembly.
Screw the drive shaft puller (commercial service tool) (A) 30 mm ...
Refilling
WARNING:
The ignition switch OFF.
Recommended fluid and capacity: Refer to Fluids and Lubricants.
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes, and check the fluid level again.
Install filler plug on transfer and tighten to the specif ...
Vehicle information display warnings and indicators
Engine start operation indicator
In the Nissan Armada, this indicator is displayed when the gear selector is positioned
in P (Park), confirming that the vehicle is in a safe state for engine start.
This symbol informs the driver that the Nissan Armada engine can be started by
pressing the ...
0.0056