Description
When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.
CAUTION:
During MAC key writing, maintain the following conditions:
-
Ignition switch ON
-
CONSULT is connected to internet
Work Procedure
PERFORM MAC KEY WRITING
-
Ignition switch ON.
-
Select "MAC key writing" on "Work support" of "BCM" using CONSULT.
-
Touch "Write".
>>
WORK END
Other materials
Automatic Transmission (AT)
9 speed automatic transmission
The Nissan Armada is equipped with a sophisticated 9-speed automatic transmission
that is electronically managed by an advanced transmission control module. This
system is engineered to deliver optimal fuel efficiency, smooth gear transitions,
and responsive per ...
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and SUSPECTED PARTS Symptom Reference
Noise
Gear tooth rough
×
Inspection, Inspection
Gear contact improper
×
Adjustment
Tooth surfaces wo ...
Automatic Back Door Lock and Close Switch
Description
Automatic back door close function does not operate using automatic back door lock and close switch.
Diagnosis Procedure
CHECK AUTO OPEN/CLOSE FUNCTION
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refe ...