Removal and Installation
Removal and InstallationCondition of the Panel
Before beginning, thoroughly check the panel and make any necessary corrections.
(1) CLEARANCE BETWEEN WELDING SURFACES
Gaps between the surfaces to be welded cause poor current flow. Even if welding could be done without removing such gaps, the welded area would be smaller, resulting in poor streng ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Check the following items, and replace the part if necessary.
Lower link for deformation, cracks or damage.
Bushings for complete seperation. (If completely seperated, inner metal can be pulled out from lower link.)
Ball joint boot for cracks or other damage, and ...
Diagnosis Procedure
CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT
Perform self-diagnosis for “DIFFERENTIAL LOCK”.
Is any malfunction detected by self-diagnosis?
YES>>
Check the malfunctioning system. Refer to DTC Index.
NO>>
GO TO 2.
CHECK DIFFERENTIAL LOCK MODE SWITCH
Perform trouble diagnosis for diffe ...