Removal and Installation
REMOVAL
Disengage fixing pawls using a remover tool (A) according to numerical order 1 → 2 indicated by arrows as shown in figure, and then remove sliding switch knob.
 |
: Pawl |
Disengage fixing pawls using a remover tool (A), and then remove reclining switch knob.
|
: Pawl |
Remove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Remove power seat switch fixing screws 
and then remove power seat switch.
INSTALLATION
Install in the reverse order of removal.
Other materials
Front Suspension Safety Precautions
Precautions for Supplemental Restraint System (SRS) Air Bag And Seat belt Pre-Tensioner
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for c ...
System Setting
Description
The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.×: Applicable Setting Change ...
Normal Operating Condition
Description
Symptom Possible cause
Unstable object detection
The vehicle is on a rough surface, such as stone or gravel.
When used in poor weather conditions, such as heavy snow/rain or strong wind.
When subjected to an ultrasonic noise generated from exhaust muffler or brakes.
When le ...