Observe the following precautions when disassembling and assembling drive shaft.
Never disassemble joint sub-assembly because it is non-overhaul parts.
Perform work in a location which is as dust-free as possible.
Clean the parts, before disassembling and assembling.
Prevent the entry of foreign objects during disassembly of the service location.
Reassemble disassembled parts carefully in the correct order. If work is interrupted, a clean cover must be placed over parts.
Use paper waste. Fabric shop cloths must not be used because of the danger of lint adhering to parts.
Clean disassembled parts (except for rubber parts) with kerosene which shall be removed by blowing with air or wiping with paper waste.
Precautions for Removing Battery Terminal
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Removal and Installation
REMOVAL
CAUTION:
Before removing sunshade motor, check that sunshade is fully opened.
After removing sunshade motor, never attempt to rotate sunshade motor assembly as a single unit.
Remove headlining to make work space. Refer to Removal and Installation.
Disconnect harness connector, and then dis ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Check the following items, and replace the part if necessary.
Upper link and bushing for deformation, cracks or damage.
Ball joint boot for cracks or other damage, and also for grease leakage.
Ball Joint Inspection
Manually move ball stud to confirm it moves smoo ...
In Car Camera menu
The Nissan Armada In-Car Camera system allows you to capture video and photos
inside the vehicle cabin, making it an excellent tool for recording memorable family
trips, monitoring passengers, or documenting important moments during your journey.
This feature enhances the overall driving exper ...