Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
(NI-39570) Chassis ear |
| Locates the noise |
(NI-50397) NISSAN Squeak and Rattle Kit |
| Repairs the cause of noise |
Preparation
Commercial Service ToolsDiagnosis Procedure
Possible cause Inspection item Reference page ProPILOT Assist switch is stuck ADAS control unit 2: Check "MAIN SW" of data monitor item Diagnosis Description Check self-diagnosis result of ADAS control unit 2 DTC Index ECM cannot read ON/OFF of ProPILOT Assist switch Check self-diagnosis r ...
Work Flow
WORK FLOW (WITH GR8-1200 NI)
Starting System Diagnosis With GR8-1200 NI
To test the starting system, use the following special service tool:
Multitasking battery and electrical diagnostic station GR8-1200 NI
NOTE:
Refer to the diagnostic station Instruction Manual for proper starting system diagnos ...
Hoses
HOSE REMOVAL AND INSTALLATION
To prevent damage to rubber hose, do not pry off rubber hose with tapered tool or screwdriver.
To reinstall the rubber hose securely, check that hose insertion length and orientation is correct. (If tube is equipped with hose stopper, insert rubber hose into tube until ...