NOTE:
Perform self-diagnoses with CONSULT before performing the symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.
| Symptom | Corresponding malfunction part | Check item/Reference | |
|---|---|---|---|
Front air conditioning system does not activate.
Fail-safe does not activate. |
| Check A/C auto amp. power supply and ground circuits. Refer to Diagnosis Procedure. | |
| Front air conditioning cannot be controlled. | Display unit operation | Check AV system. Refer to Work Flow. | |
| All control |
| Check multifunction switch power supply and ground circuits. Refer to Diagnosis Procedure. | |
| A part of control | Multifunction switch | Replace multifunction switch. Refer to Removal and Installation. | |
| Discharge air temperature (driver side) does not change. | Front air mix door motor (driver side) system installation condition | Check front air mix door motor (driver side) system properly installed. Refer to Exploded View. | |
| Discharge air temperature (passenger side) does not change. | Front air mix door motor (passenger side) system installation condition | Check front air mix door motor (passenger side) system properly installed. Refer to Exploded View. | |
| Air outlet does not change. | Front mode door motor system installation condition | Check front mode door motor system properly installed. Refer to Exploded View. | |
| Air inlet does not change. | Intake door motor system installation condition | Check intake door motor system properly installed. Refer to Exploded View. | |
| Front blower motor does not operates or operation speed is not normal. |
| Check front blower motor circuits. Refer to Diagnosis Procedure. | |
| Compressor does not operate. |
| Refer to Diagnosis Procedure. | |
|
| Refer to Diagnosis Procedure. | |
|
| Refer to Diagnosis Procedure. | |
| Noise is heard when the air conditioning operates. | During compressor operation | Cooler cycle | Symptom table for noise Refer to Symptom Table. |
| During front blower motor operation |
| Check front blower motor. Refer to Component Inspection (Front Blower Motor). | |
| Biometric cooling control does not activate. | IR sensor | Check IR sensor. Refer to Diagnosis Procedure. | |
| Login ID control does not operate. (Air conditioning function only) | A/C auto amp. | Replace A/C auto amp. Refer to Removal and Installation. | |
| Automatic intake control (exhaust gas / outside odor detecting mechanism) does not operate |
| Check exhaust gas / outside odor detecting sensor power supply and ground circuit. Refer to Diagnosis Procedure. | |
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of "Head Up Display” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if "Head Up Display” is not displaye ...
Exploded View
Headlining assembly Personal lamp Personal lamp bracket : Pawl : Vehicle front ...
Hydraulic Layout
EVAP canister purge volume control solenoid valve EVAP resonator EVAP line Fuel line Fuel tank Fuel filler neck EVAP canister ...