Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Third Seat Rh Position Initialization

Description

Perform the third seat RH position initialization when the following conditions are performed. For details, refer to Work Procedure.

  • Replacing third seat control unit RH.
  • Replacing third seat RH.
  • Manual function and folding function of third seat RH does not operate normally.

Work Procedure

CHOOSE METHOD

There are two ways of initialization method.

Which method do you choose?

With CONSULT>>

GO TO 2.

Without CONSULT>>

GO TO 3.

WITH CONSULT

With CONSULT

  1. Ignition switch ON.
  2. Perform "Third seat RH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSULT.
  3. After initialization is complete, the buzzer sounds twice.

>>

GO TO 4.

WITHOUT CONSULT

Without CONSULT

  1. Stop the vehicle and start the engine.
  2. Press the reclining switch RH (forward).
  3. Press the reclining switch RH (backward) within 1 second.
  4. Press the reclining switch RH (forward) within 1 second.
  5. Press the reclining switch RH (backward) within 1 second.
  6. After repeating steps 4 and 5 three times, release the reclining switch RH.
  7. After initialization is complete, the buzzer sounds twice.

>>

GO TO 4.

CHECK THE FUNCTION

Check that manual function and folding function operates normally.

>>

WORK END

    Other materials

    Seat belt extenders
    If, due to body size or seating position, the standard lap-shoulder belt in the Nissan Armada cannot be comfortably or properly fastened, a compatible seat belt extender is available. This accessory is specifically designed to work with the original seat belt system installed in the Nissan Arm ...

    Water Pump
    Exploded View Water pump Gasket     : N·m (kg-m, ft-lb)         : Always replace after every disassembly.         Removal & Installation WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a p ...

    Squeak and Rattle Trouble Diagnoses
    Work Flow CUSTOMER INTERVIEW The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain all the facts and conditions that exist when the noise occurs (or does not occur). If there is more than one noise in the vehicle, perform a diagnosis and re ...