Exploded View
 |
Washer tank assembly |  |
Packing |  |
Hoodledge assembly RH |
 |
Washer tank inlet |  |
Washer tank cap | ||
 |
: N·m (kg-m, in-lb) | ||||
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When washer tank assembly is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Fully open hood assembly.
Remove washer tank inlet fixing clip 
, and then remove washer tank inlet and washer tank cap.
Remove fender protector RH. Refer to Removal and Installation.
Disconnect front washer tube A from washer pump, washer pump tube from connector, and washer pump harness connector 
.
Disconnect washer level switch harness connector .
Remove washer tank assembly mounting bolts.
Slide to release engaged point of washer tank assembly and hoodledge assembly RH, and then remove washer tank assembly according to the numerical order 1→2 indicated by arrows as shown in the figure.
Remove washer pump and packing from washer tank. Refer to Removal and Installation.
Remove washer level switch and packing from washer tank. Refer to Removal and Installation.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Slide washer tank assembly
to install engaged points of washer tank assembly and 
of hoodledge assembly RH according to the numerical order 1→2 indicated by arrows as shown in the figure.
-
After installation, refill washer tank assembly with washer fluid, and then check that there is no leakage.
Other materials
Air Breather
Exploded View
Transfer assembly
Air breather hose A
Clip A
Hose connector
Clip B
Air breather hose B
Clip C
Air breather
: Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle hei ...
Front Seat Belt Buckle
Removal and Installation
REMOVALRemove front seat. Refer to Removal and Installation.
Disconnect seat belt buckle harness connector and disengage harness clip.
Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle.INSTALLATIONInstall in the reverse order of removal.
Inspecti ...
Massage Switch
Removal and Installation
REMOVALRemove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage massage switch harness fixing clip.
: Clip
Remove fixing screws and then remove massage switch.
INSTALLATIONInstall in the reverse order of removal. ...