Chevrolet Sonic manuals
 

Nissan Armada 2025-2026 Service and Repair Manual: When SRS is activated in a collision

Nissan Armada 2025-2026 Service and Repair Manual / Restraints / Srs Airbag — Basic Inspection / Collision Diagnosis / When SRS is activated in a collision

CAUTION:

WORK PROCEDURE

  1. Replace the following components.

    • Front seatback assembly (on the side on which side air bag is activated).

    • Rear seatback assembly (on the side on which side air bag is activated).

    • Door finisher (on the side on which door-mounted curtain air bag is activated).

    • Pop-up roll bar assemblies and pop-up roll bar covers.

    • Side air bag (satellite) sensor LH/RH (on the side on which side air bag is activated).

    • Diagnosis sensor unit.

    • Seat belt pre-tensioner assemblies.

  2. Check the SRS components and the related parts using the following table.

    Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation, etc).

  3. Perform self-diagnosis using CONSULT and “AIR BAG” warning lamp. Refer to System Description for details.

    Make sure entire SRS operates properly.

SRS INSPECTION (FOR SIDE AND ROLLOVER COLLISION)

Part Inspection
Side curtain air bag module LH

If the side curtain air bag LH has deployed:

REPLACE the side curtain air bag module LH.

Install with new fasteners.
Side curtain air bag module RH

If the side curtain air bag RH has deployed:

REPLACE the side curtain air bag module RH.

Install with new fasteners.
Front side air bag module LH

If the front side air bag LH has deployed:

REPLACE the front seatback assembly LH.
Front side air bag module RH

If the front side air bag RH has deployed:

REPLACE the front seatback assembly RH.
Front center air bag module

If the front center air bag has deployed:

REPLACE the front seatback assembly RH.
Rear side air bag module LH

If the rear side air bag LH has deployed:

REPLACE the rear seatback assembly.
Rear side air bag module RH

If the rear side air bag RH has deployed:

REPLACE the rear seatback assembly.
Side air bag (satellite) sensor (LH or RH)

If any of the SRS components have deployed:

REPLACE the side air bag (satellite) sensor on the collision side with new fasteners.
Door (satellite) sensor (LH or RH)

If any of the SRS components have deployed:

REPLACE the door (satellite) sensor on the collision side with new fasteners.
Diagnosis sensor unit

If any of the SRS components have deployed:

REPLACE the diagnosis sensor unit with new fasteners.

Seat belt pre-tensioner assemblies

(All applicable locations: buckle, retractor, lap outer)

If either the driver or passenger seat belt pre-tensioner* has been activated:

REPLACE all seat belt pre-tensioner assemblies with new fasteners.

*: Confirm seat belt pre-tensioner activation using CONSULT only.
Center inner pillar

  1. Check the center inner pillar on the collision side for damage (dents, cracks, deformation).

  2. If damaged - REPAIR the center inner pillar.

Trim/headlining

  1. Check for visible signs of damage (dents, cracks, deformation) of the interior trim on the collision side.

  2. If damaged - REPLACE the damaged trim parts.

Door-mounted curtain air bag module LH

If the door-mounted curtain air bag module LH has been deployed:

REPLACE the door finisher LH and door-mounted curtain air bag module.

Install with new fasteners.
Door-mounted curtain air bag module RH

If the door-mounted curtain air bag module RH has been deployed:

REPLACE the door finisher RH and door-mounted curtain air bag module.

Install with new fasteners.
Occupant classification system (Passenger seat)

  1. Remove passenger seat assembly.

  2. Check control unit case for dents, cracks of deformities.

  3. Check connectors for damage and terminals for deformities.

  4. Check seat frame and cushion pan for dents or deformities.

  5. If no damage is found, reinstall seat with new fasteners.

  6. If damaged - REPLACE the seat cushion assembly with new fasteners.

Pop-up roll bar assemblies

If the pop-up roll bar has deployed:

REPLACE the pop-up roll bar assemblies and pop-up roll bar covers.

Install with new fasteners.
For Side and Rollover Collision
...

When SRS is not activated in a collision
CAUTION: WORK PROCEDURE Check the SRS components and the related parts using the following table. If the front seatback assembly is damaged, the front seatback assembly must be replaced. If the rear s ...

Other materials:

Determining Various Conditions of the Collision
Size, shape, position, rigidity, etc. of the other vehicle involved in the collision Speed of both vehicles at the time of collision Collision angle and direction Number of occupants and their positions at the time of collision Size, shape, hardness, etc. of load in the vehicle History of damaged po ...

Draining
WARNING: Start the engine and let it run to warm up transmission. Stop the engine. Lift up the vehicle. When the oil pan positioning mark is difficult to find, mark it with paint or like beforehand. Remove the drain plug to allow fluid to drain using OFT position change wrench (SST: NI-52972–2) ...

Passenger compartment
Example The interior of the Nissan Armada is designed for comfort, technology, and convenience. This section outlines key controls, storage areas, and comfort features that enhance the driving and passenger experience in the Nissan Armada. Inside mirror Overhead console Map lights ...

© 2014-2026 Copyright www.niarmada.com
 
0.005