DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
CAUTION:
>>GO TO 2.
CHECK SYMPTOM
CAUTION:
>>GO TO 3.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for "Driving Video Recorder".
Is DTC detected?
YES>>Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.
NO>>INSPECTION END
PERFORM DTC DIAGNOSIS PROCEDURE
With CONSULT
Perform DTC confirmation procedures for the error-detected system.
NOTE:
If some DTCs are detected at the same time, determine the order for performing the diagnosis. Refer to DTC Inspection Priority Chart.
Is DTC detected?
YES>>GO TO 5.
NO>>Check harness and connectors based on the information obtained by interview.
REPAIR OR REPLACE ERROR-DETECTED PARTS
With CONSULT
Repair or replace error-detected parts.
Reconnect part or connector after repairing or replacing.
When DTC is detected, erase self-diagnostic result for “Driving Video Recorder”.
GO TO 6.
FINAL CHECK
With CONSULT
Check the "Values On The Diagnosis Tool" for "Driving Video Recorder".
Is the symptom reproduced?
YES>>GO TO 3.
NO>>INSPECTION END
Diagnostic Work SheetWork Procedure
DESCRIPTION
The purpose of the operation inspection is to check that the individual system operates normally.
Check condition : Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)
CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning.
Set temperatur ...
Work Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit). For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure [After Replace ABS actuator and electric unit (control un ...
Warning and indicator lights
Red light
Brake warning light
Charge warning light
Electric power steering warning light
Electric shift control system warning light
Electronic parking brake warning light
Engine oil pressure warning light
Hands OFF warning light
Master warning light
...