Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air suspension contorol module.
For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure
WRITING VEHICLE SPECIFICATION AND VIN
With CONSULT
Perform writing vehicle specification to air suspension control module according to "Replace ECU" in CONSULT Operation Manual.
NOTE:
Ignition switch ON or engine start during writing the vehicle specification and VIN.
When "Replace ECU" is performed, VIN registration is completed at the same time. Check that U1A76-55 of "Current DTC" switched to one of "Past DTC".
GO TO 2.
PERFORM NECESSARY WORK
With CONSULT
Select "Air suspension" and perform "Work support" in the following order. Refer to Work Support.
Venting valve operation check
Air filling/pressure measurement
Height sensor calibration
Vehicle height adjustment
Perform self-diagnosis for “All self diagnosis result”.
Erase the memory of self-diagnosis results.
WORK END
Other materials:
When SRS is not activated in a collision
CAUTION:
WORK PROCEDURE
Check the SRS components using the table below.
Ensure entire SRS operates properly.
SRS INSPECTION (FOR FRONTAL COLLISION)
Part Inspection Driver air bag module If the driver air bag has not been activated:
Remove driver air bag module. Check harness cover and connectors ...
NVH Troubleshooting Chart
Possible cause and SUSPECTED PARTS Symptom Reference BRAKE Noise Shake Shimmy, Judder Pads damaged × — — FRONT DISC BRAKE: Inspection and Adjustment
REAR DISC BRAKE: Inspection and Adjustment
Pads uneven wear × — — FRONT DISC BRAKE: Inspection and Adjustment
REAR DISC BRAKE ...
Specifications
Engine
The spark ignition system in the Nissan Armada is fully compliant with
the Canadian ICES-002 standard, ensuring reliable operation and adherence to regulatory
requirements.
Wheels and tires
Road wheel
Tire
Dimensions
*1 : Models equipped with 18-inch wheels
*2 : ...
0.0066