Wiring Diagram
Wiring DiagramDiagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
Select “High beam request” in “Data Monitor” mode of ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table. Refer to Diagnosis Procedure.
>>
GO TO 2.
PERFORM SELF-DIAGNOSIS RESULT
With CONSULT
Select “Self Diagnostic Result” mode of “INTELLIGENT KEY”, and check if DTC is detected.
Is DTC detected?
YES> ...
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
PERFORM MEMORY STORING
Perform MEMORY STORING. Refer to Description.
Check memory function operation.
Does it operate normally?
YES>>
Memory ...