CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
PERFORM MEMORY STORING
Perform MEMORY STORING. Refer to Description.
Check memory function operation.
Does it operate normally?
YES>>Memory function is normal.
NO>>GO TO 3.
CHECK SEAT MEMORY SWITCH
Check seat memory switch LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
All Component
Seat SlidingDisassembly and Assembly
DISASSEMBLY
CAUTION:
Disassemble and assemble steering gear assembly by fixing the mounting area with a vise using copper plates.
Loosen outer socket lock nut, and remove outer socket.
CAUTION:
To prevent damage, hold outer socket across flats using suitable tool while loosening outer socket lock ...
Work Procedure
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any means other than CONSULT.)
Replacing ABS actuator and electric unit (control unit)
CHANGE OF SYSTEM MODE
With CONSULT
Select “ABS”, "Work support", and "System mode change" according to this o ...
Inspection
INSPECTION AFTER REMOVAL
Timing Chain
Check for cracks and any excessive wear at link plates and roller links of timing chain. Replace timing chain if necessary.
: Crack : Wear
INSPECTION AFTER INSTALLATION
Inspection for Leakage
The following are procedures for checking fluids leakage, lubricat ...