Work Procedure
Always perform the AEB system action test to check that the system operates normally after replacing the ADAS control unit 2, replacing the AEB system malfunction.
CHECK AEB SYSTEM SETTING
-
Start the engine.
-
Check that the AEB system setting can be enabled/disabled on the information display.
>>
INSPECTION END
Other materials
Heavy Tight-Corner Braking Symptom Occurs
Description
Heavy tight-corner braking symptom occurs when the vehicle is driven and the steering wheel is turned fully to either side after the engine is started.NOTE:
Light tight-corner braking symptom may occur depending on driving conditions. This is not malfunction.
Diagnosis Procedure
PERFORM ...
Seat Cushion Blower Motor
Removal and Installation
REMOVALRemove front seat cushion trim and pad. Refer to Disassembly and Assembly.
Disengage fixing pawls and then remove front seat cushion blower motor.
: Pawl
Disengage front seat cushion blower motor harness fixing clip.
Disconnect front seat cushion blower motor con ...
Door Does Not Lock/unlock and Engine Does Not Start (all I-Key/req Sw/push Sw)
Description
All doors do not lock/unlock using door request switch and engine does not start when push-button ignition switch is pressed while carrying Intelligent Key.SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (remote keyless entry) Door lock operation (one to ...