After replaced air bag diagnosis sensor unit, it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.
Work Flow
Work ProcedureWork Procedure
CHOOSE METHOD
There are two ways of setting method.
Which method do you choose?
With information display>>
GO TO 2.
With set switch>>
GO TO 3.
WITH INFORMATION DISPLAY
Ignition switch ON.
Select "Driving Position" of “Vehicle Settings” of "Settings" of information display.
Selec ...
Diagnosis Procedure
CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT
Check that DTC is not detected with air bag diagnosis sensor unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to DTC Index.
CHECK COMBINATION METER
Check combination meter. Refer to Work flow.
Is the inspection result normal? ...
Diagnosis Procedure
SYMPTOM CHECK 1
Check that there are pedal vibrations when the engine is started.
Do vibrations occur?
YES>>
GO TO 2.
NO>>
Check the brake pedal. Refer to Inspection.
SYMPTOM CHECK 2
Check that motor sound from ABS actuator and electric unit (control unit) occurs when the engine starts ...