ADJUSTMENT AFTER INSTALLATION
When replaced the torque converter, perform "TORQUE CONVERTER CLUTCH POINT LEARNING". Refer to Descripton.
Removal and InstallationInspection
INSPECTION AFTER REMOVAL
Move joint up/down, left/right, and in the axial direction. Check for any rough movement or significant looseness.
Check boot for cracks or other damage, and also for grease leakage.
If a malfunction is found, disassemble drive shaft, and then replace with new one.
INSPECT ...
Precautions For Engine Service
DISCONNECTING FUEL PIPING
Before starting work, check no fire or spark producing items are in the work area.
Release fuel pressure before disconnecting and disassembly.
After disconnecting pipes, plug openings to stop fuel leakage.
DRAINING ENGINE COOLANT
Drain engine coolant and engine oil when t ...
Tire pressure
Tire Pressure Monitoring System (TPMS)
The Nissan Armada is equipped with an advanced Tire Pressure Monitoring System
(TPMS) designed to continuously track the air pressure in all tires except the spare.
When the tire pressure drops significantly below the recommended level, the low
tire press ...