Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Remove A/T assembly. Refer to Removal and Installation (2WD), Removal and Installation (4WD).
Remove torque converter by holding it firmly and turning while pulling straight out.
Remove seal ring from input shaft.
CAUTION:
Never reuse seal ring.
Remove converter housing oil seal.
CAUTION:
Never reuse converter housing oil seal.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Never reuse seal ring.
Never reuse converter housing oil seal.
Check dimension (A) between torque converter and torque converter housing as shown.
Dimension (A) : Refer to Torque Converter. (B) : Scale (C) : Straight edge
Exploded View
A/T assembly Converter housing oil seal Seal ring Torque converter : Always replace after every disassembly. : Apply ATF ...
Adjustment
ADJUSTMENT AFTER INSTALLATION
When replaced the torque converter, perform "TORQUE CONVERTER CLUTCH POINT LEARNING". Refer to Descripton. ...
Other materials:
Draining
WARNING:
IN CASE REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
Regarding brake fluid draining, refer to Work Procedure.
IN CASE NOT REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
CAUTION:
Connect a vinyl tube to the bleed valve.
Depress the brake pedal and ...
Removal & Installation
REMOVAL
NOTE:
The mass airflow sensor can be removed while still installed on the air cleaner cover.
Pinch the clip on the air cleaner cover to release the lock, and remove the air cleaner cover.
: Vehicle front
Remove air cleaner filter from air cleaner body .
: Vehicle front
INSTALLAT ...
Cockpit
Example
The cockpit of the Nissan Armada is thoughtfully designed to provide intuitive
control, comfort, and accessibility for the driver. Every switch, button, and control
element is positioned to enhance driving convenience and ensure that essential functions
are always within easy reac ...
0.0049