Nissan Armada 2025-2026 Service and Repair Manual: Adjustment
ADJUSTMENT AFTER INSTALLATION
Adjust neutral position of steering angle sensor. Refer to Work Procedure.
Inspection
INSPECTION AFTER REMOVAL
Appearance
Check the following items, and replace the part if necessary.
Lower link for deformation, cracks or damage.
Bushings for complete seperation. (If completely seperat ...
Upper Link
...
Other materials:
Work Procedure
Always perform the side radar alignment after performing the following work.
After removing and installing or replacing the side radar.
After removing and installing, replacing or repainting the rear bumper.
Side radar alignment conditions are following;
The vehicle speed is 20 km/h (13 MPH) or hig ...
Exploded View
REMOVAL
Member Cotter pin Steering gear assembly : Vehicle front : N·m (kg-m, ft-lb) : Always replace after every disassembly.
DISASSEMBLY
Outer socket Outer socket lock nut Boot clamp (small diameter) Boot Boot clamp (large diameter) Inner socket Gear housing assembly : N·m (kg ...
Special Service Tools
Tool number
(TechMate No.)
Tool name Description KV10122000
(NI-53383)
Side oil seal puller
Removing side oil seal KV10123000
(NI-53384)
Side oil seal installer
Installing side oil seal ...
0.0055