Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Anti-Pinch Inspection

Description

If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function. Refer to Work Procedure.

  • When each power window motor replaced.

  • Power supply to the each power window motor is not cut off properly.

  • Removal and installation of regulator assembly.

  • Removal and installation of each power window motor from regulator assembly.

  • Operation of regulator assembly as an independent unit.

  • Removal and installation of door glass.

  • Removal and installation of door glass run.

Work Procedure

CHECK ANTI-PINCH FUNCTION

  1. Fully open the door glass.

  2. Place a piece of wood near fully closed position.

  3. Close door glass completely with AUTO UP.

  4. Check the following conditions.

    • Check that door glass lowers for 145 mm (5.71 in) without pinching piece of wood and stops.

    • Check that door glass does not rise when operating the power window main switch while lowering.

      CAUTION:

      • Perform system initialization when AUTO UP operation or anti-pinch function does not operate normally.

      • Check that AUTO-UP operates before inspection when system initialization is performed.

      • Never check with hands and other body parts because they may be pinched. Never get pinched.

>>

END

    Other materials

    Interior lights
    Basic information CAUTION In the Nissan Armada, avoid leaving interior lights switched on for extended periods when the engine is not running, as this may lead to battery discharge. Always switch off all interior lighting before leaving the Nissan Armada to preserve battery life and ens ...

    Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs). Check operation condition of the function that is malfunctioning. >> GO TO 2. CHECK ...

    Door Mirror
    Diagnosis Procedure CHECK MANUAL OPERATION Check manual operation. Does it operate normally? YES>> GO TO 2. NO>> Refer to Diagnosis Procedure. CHECK MIRROR SENSOR Check mirror sensor. Door mirror LH: Refer to Component Function Check. Door mirror RH: Refer to Component Function Che ...