Diagnosis Procedure
CHECK AUTO RETRACTABLE DOOR MIRROR SYSTEM OPERATION
-
Set the auto retractable door mirror to be operable with the combination meter.
-
Check operation of auto retractable door mirror system.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 2.
CHECK POWER WINDOW MAIN SWITCH AND PASSENGER DOOR MIRROR CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch and passenger door mirror control module power supply and ground circuit.
-
Power window main switch: Refer to Diagnosis Procedure.
-
Passenger door mirror control module: Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK POWER WINDOW MAIN SWITCH OR PASSENGER DOOR MIRROR CONTROL MODULE LIN COMMUNICATION CIRCUIT
Check power window main switch and passenger door mirror control module LIN communication circuit.
-
Power window main switch: Refer to Diagnosis Procedure.
-
Passenger door mirror control module: Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
REPLACE BCM
-
Replace BCM. Refer to Removal and Installation.
-
Confirm the operation again.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Connecting Rod Bearings
Connecting Rod Bearing
DESCRIPTION Selection points Selection parts Selection items Selection methods
Between cylinder block and crankshaft
Main bearing
Main bearing grade
(bearing thickness)
Determined by match of cylinder block bearing housing grade (inner diameter of housing) and crank ...
Diagnosis and Repair Workflow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing reproduce symptoms as well as fully understand it. Ask customer about his/her complaints carefully. Check symptoms by driving vehicle with customer, if neces ...
Configuration (air Bag Diagnosis Sensor Unit)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagno ...