Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.
Disengage back door finisher cap fixing pawls using a remover tool (A), and then remove back door finisher cap.
 |
: Pawl |
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Check in advance that pawls are accurately aligned with the portions on back door panel, and then install by pressing in.
Other materials
4WD shift switch
Example
Select the appropriate 4WD mode in the Nissan Armada by shifting the 4WD
switch to AUTO, 4H, or 4L (if equipped), depending on current road and driving
conditions. This flexibility allows the Nissan Armada to adapt to both on-road
and off-road environments.
When AUTO mode ...
Catalyst
Exploded View
Clamp (bank 1)
Gasket 1 (bank 1)
Catalyst converter (bank 1)
Catalyst converter support bracket (bank 1)
Air fuel ratio (A/F) sensor (bank 1)
Gasket 2 (bank 1)
2nd catalyst converter (bank 1)
Heated oxygen sensor (bank 1)
Bracket (bank 1)
Clamp (bank 2) ...
Blower Unit
Exploded View
Front heater & cooling unit assembly
In-cabin microfilter
Filter cover
Front blower motor
A/C auto amp.
Front blower unit
Intake door motor
: Pawl
: vehicle front
Removal and Installation
REMOVALRemove front heater & ...