Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.

Disengage automatic back door switch finisher fixing pawls using a remover tool (A).

![]() |
: Pawl |
Disconnect harness connectors, and then remove automatic back door switch finisher.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Check in advance that pawls are accurately aligned with the portions on back door panel, and then install by pressing in.
Other materials
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK ...
Back Door Assembly
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing back door assembly.
REMOVALRemove roof rea ...
Additional Service When Replacing Combination Meter
Work Procedure
DESCRIPTIONWhen replacing the Combination meter, perform the procedures before and after replacement.Before ReplacementTake note the odometer mileage of the combination meter. When replacing the combination meter, check that DTC’s are not detected at "self-diagnostic result" of ABS. ...
