Removal and Installation
REMOVAL
Pull up and remove engagement with body from the seam of back door weather-strip.
CAUTION:
-
Never pull strongly on back door weather-strip.
-
When removing back door weather-strip, pull it away from the vehicle by holding back door weather-strip by the base part
, and not the upper part, for preventing damage.
INSTALLATION
Working from the upper section, align back door weather-strip
center mark (green color)
with vehicle center position mark
and install weather-strip onto the vehicle
.

Align back door weather-strip
matching mark (yellow color)
with border
between roof rear garnish
and back pillar garnish
, and then install weather-strip onto the vehicle
.

CAUTION:
Never install weather-strip while pulling it.
Install weather-strip onto the vehicle between the locations installed in procedure step 1 and 2.
Align the seam
of back door weather-strip
with the center
of back door striker
, and then install weather-strip onto the vehicle.

Align back door weather-strip
matching mark (yellow color)
with border
between luggage side lower finisher
and luggage rear plate
, and then install weather-strip onto the vehicle
.

CAUTION:
Never install weather-strip while pulling it.
Install weather-strip onto the vehicle between the locations installed in procedure step 4 and 5.
Install weather-strip onto the vehicle between the locations installed in procedure step 2 and 5.
Pull back door weather-strip gently to ensure that there is no loose section.
CAUTION:
Check that weather-strip fits tightly in each corner.
Other materials
Basic information
WARNING
Never operate your Nissan Armada while the parking brake is engaged.
Driving with the parking brake applied can cause overheating, reduced braking
performance, and eventual brake failure, significantly increasing the risk of
an accident.
Do not release the parking brake of you ...
Engine compartment check locations
Window washer fluid reservoir
Fuse/fusible link holder
Engine oil filler cap
Engine oil dipstick
Brake fluid reservoir
Battery
Engine coolant reservoir
Radiator filler cap
Drive belts
Air cleaner
VR35DDTT engine
NOTE:
Depending on the configuration of your Nissan Arma ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
>>
GO TO 2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>>
GO TO 3.
FAIL-SAFE ACTIVATION CHECK
Check that the symptom is applied to the fail-safe activation.
D ...