Brakes
PrecautionsRemoval and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect front camera unit harness connector.
Release pawls of bracket, and remove front camera unit from bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not touch or shock the driver assist ...
Inspection
WARNING:
APPEARANCE
Road Wheel
Check road wheel for deformation, cracks, corrosion and other damage.
Check wheel nuts for looseness by using torque wrench.
Wheel nut tightening torque Refer to ROAD WHEEL TIRE : Exploded View.
Tire
Check entire circumference and both sides of each tire for deform ...
Disassembly and Assembly
WHEEL SIDE
Disassembly
Fix shaft with a vise.
CAUTION:
Protect shaft when fixing with a vise using aluminum or copper plates.
Remove dust shield from joint sub-assembly.
Remove boot bands and then remove boot from joint sub-assembly.
Screw the drive shaft puller (commercial service tool) (A) 30 mm ...