| Tool name | Description | |
Flare nut torque wrench a: 10 mm (0.39 in), 11 mm (0.43 in), 12 mm (0.47 in) |
| Installing brake piping |
| Brake caliper wrench |
| Return the piston (Front brake caliper) |
| Brake caliper wrench |
| Return the piston (Rear brake caliper) |
Preparation
Lubricant or/and SealantGrinding the Filled Area
Grind the filler when it is half-dried. Half-dried filler means the condition where the surface, if ground lightly with a surform, will produce continuous linear chips. Grinding with the surform will be difficult after the filler hardens completely.
(1) ROUGH GRINDING BY SURFORM
Smooth the filler su ...
Removal and Installation
WORK STEP
When removing instrument panel assembly and display unit take steps in the order shown by the numbers below.
PARTS INSTRUMENT PANEL ASSEMBLY DISPLAY UNIT Dash side finisher RH [1] Instrument lower cover RH [2] Glove box assembly [3] Passenger knee air bag module [4] Instrument ...
Avoiding collision and rollover
WARNING
Improper or unsafe operation of the Nissan Armada may lead to loss of control,
serious accidents, or vehicle rollover. Always drive responsibly and remain fully
aware of road conditions and surroundings.
Stay alert at all times and practice defensive driving techniques when operating
...