Nissan Armada 2025-2026 Service and Repair Manual: Commercial Service Tools
| Tool name | Description | |
|---|---|---|
Drift a: 61.0 mm (2.402 in) dia. b: 56.3 mm (2.217 in) dia. |
| Installing front oil seal |
Drift a: 66.3 mm (2.610 in) dia. b: 61.9 mm (2.437 in) dia. |
| Installing rear oil seal |
Drift a: 68.6 mm (2.701 in) dia. b: 58.0 mm (2.283 in) dia. |
| Installing input oil seal |
| Power tool |
| Loosening bolts and nuts |
Preparation
...
Sealant or/and Lubricant
Name Description Genuine Liquid Gasket
(Loctite 598 or equivalent) Application to mating surface of rear case ...
Other materials:
Calibration of Yaw Rate Sensor
CAUTION:
Always perform the yaw rate sensor calibration before driving when the following operation is performed. Refer to Work Procedure.
×: Required —: Not required
Procedure Yaw rate sensor calibration Removing/ installing ABS actuator and electric unit (control unit) × Replacing ABS act ...
Service Notice or Precautions for Transfer
Use recommended transfer oil only. Refer toFluids and Lubricants.
Never reuse transfer fluid, once it has been drained.
Check the fluid level or replace the fluid only with the vehicle parked on level ground.
During removal or installation, keep inside of transfer clear of dust or dirt.
Replace all ...
Trailer BSW function operation
Detection zone
Basic information
The Nissan Armada Trailer Blind Spot Warning (BSW) function is specifically designed
to enhance safety while towing by extending the detection area to include the full
length of the attached trailer. In this configuration, the monitoring zone begins
at th ...
0.0104