Nissan Armada 2025-2026 Service and Repair Manual: Configuration
Vehicle specification needs to be written with CONSULT because it is not written after replacing the chassis control module.
For details the operation, refer to "CONSULT Operation Manual".
Refer to Work Procedure.
Work Procedure [After Replacing Chassis Control Module]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to chassis control module according to "Replace ECU" in CONSULT Operation Manual.
>>
GO TO 2.
PERFORM NECESSARY ...
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to chassis control module according to "Replace ECU" in CONSULT Operation Manual.
>>
WORK END ...
Other materials:
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Removal and Installation
CAUTION:
There are some cautions for the clips of "Reuse" removal/install procedure. If you want reuse windshield glass, you should be read each caution at first.
Never damage painted surface and surrounded parts.
REMOVAL
Replacement Windshield Glass
Remove inside mirror or intelligent rear view mi ...
Diagnosis Procedure
CHECK “INTELLIGENT KEY SYSTEM ANSWER BACK FUNCTION SETTING” SETTING IN “WORK SUPPORT”
Select “INTELLIGENT KEY” using CONSULT.
Select “Intelligent Key system answer back function setting” in “Work support” mode.
Check the “Intelligent Key system answer back function setting” i ...
0.0052