Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure [After Replacing Chassis Control Module]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to chassis control module according to "Replace ECU" in CONSULT Operation Manual.
>>GO TO 2.
PERFORM NECESSARY WORK
With CONSULT
Perform configuration. Refer to Work Procedure.
Perform MAC key writing. Refer to Work Procedure.
Perform self-diagnosis for “CHASSIS CONTROL”.
Erase the memory of self-diagnosis results.
WORK END
Additional Service When Replacing Chassis Control Module
Vehicle specification needs to be written with CONSULT because it is not written after replacing the chassis control module. For details the operation, refer to “CONSULT Operation Manual”. ...
Configuration
Vehicle specification needs to be written with CONSULT because it is not written after replacing the chassis control module.
For details the operation, refer to "CONSULT Operation Manual".
Refer to Wo ...
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Rear door glass run Rear door panel Hole seal 1 Hole seal 2 Rear door glass Rear door lower sash upper Rear door lower sash lower Rear door inner frame rear Rear door inner frame front Rear door regulator assembly Rear door power window motor Rear door regulator : Clip : Always replac ...
ROAD WHEEL TIRE : Rotation
WARNING:
Follow the maintenance schedule for tire rotation service intervals. Refer to General Maintenance.
When installing the wheel, tighten wheel nuts to the specified torque. Refer to ROAD WHEEL TIRE : Exploded View.
CAUTION:
When installing wheels, tighten them diagonally by dividing the work ...
0.0064