Exploded View
 |
Cowl top seal |  |
Cowl top side seal |  |
EPT seal [t: 15.0 mm (0.591 in)] |
 |
Cowl top cover |  |
Cowl top clip |  |
EPT seal [t: 3.0 mm (0.118 in)] |
 |
EPT seal [t: 10.0 mm (0.394 in)] |  |
EPT seal [t: 10.0 mm (0.394 in)] |  |
EPT seal [t: 3.0 mm (0.118 in)] |
 |
EPT seal [t: 3.0 mm (0.118 in)] | ||||
 |
: Clip | ||||
 |
: Always replace after every disassembly. | ||||
Removal and Installation
REMOVAL
Fully open hood assembly.
Remove front wiper arm (LH and RH). Refer to Removal and Installation.
Remove cowl top side seal.
Disconnect front washer tube connector.
CAUTION:
When washer tube is disconnected, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Remove cowl top cover fixing clips and cowl top clips.
Pull forward to release cowl top cover from windshield glass, and then remove cowl top cover.
CAUTION:
When performing the procedure after removing cowl top cover, cover the lower end of windshield glass with urethane etc.
Remove the following parts after removing cowl top cover.
-
Cowl top seal
-
Washer nozzle. Refer to Removal and Installation.
-
Washer tube. Refer to Removal and Installation.
-
EPT seal
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Always replace cowl top side seal and cowl top cover EPT seal with a new one when installing old cowl top cover.
-
After installing, perform adjustment of wiper arms. Refer to Adjustment.
Other materials
Maintenance precautions
When performing inspection or maintenance tasks on your Nissan Armada, always
take appropriate precautions to prevent injury and avoid damaging the vehicle.
The following safety guidelines should always be observed when working on your
Nissan Armada:
WARNING
Park the Nissan Armada on a lev ...
Maintenance schedules
Basic information
To ensure your Nissan Armada delivers reliable performance, optimal safety, and
long-term efficiency, NISSAN provides two distinct maintenance schedules tailored
to different driving conditions. These schedules are carefully designed to cover
both mileage and time intervals, ...
Configuration (bcm)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification ...