Description
CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.
NOTE:
The cumulative battery discharge current value is used for 12V battery inspection.
If the cumulative value is not erased when replacing the battery, the accurate diagnoses cannot be made because it was added to the cumulative value before the battery replacement.
Work Procedure
CLEAR CUMULATIVE BATTERY DISCHARGE CURRENT VALUE
With CONSULT
-
Ignition switch ON.
-
Select “Cumulative battery discharge current clear” in “Work support” mode of “IPDM E/R” using CONSULT.
-
Touch “START” to clear the cumulative value of battery discharge current.
>>
WORK END
Other materials
I-BSI system limitations
WARNING
The following limitations apply to the Nissan Armada Intelligent Blind Spot
Intervention (I-BSI) system. Failure to operate the vehicle within these limitations
may result in serious injury or death.
The Nissan Armada I-BSI system cannot detect all vehicles or objects
in every si ...
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. The numbers indicate the order of the inspection. If necessary, repair or replace these parts.
SUSPECTED PARTS
(Possible cause) Symptom Reference
Transfer fluid leakage Noise
TRANSFER FLUID (Level low)
1 ...
Front Door Finisher
Exploded View
Front door panel
Inside seal
Front door sash inner cover
Pull handle cap
Inside handle cap
Front door finisher
Pull handle bracket
: Clip
: Pawl
: N·m (kg-m, in-lb)
...