Exploded View

![]() |
IPDM E/R cover A | ![]() |
IPDM E/R | ![]() |
IPDM E/R cover B |
![]() |
IPDM E/R cover C | ![]() |
IPDM E/R cover D | ![]() |
IPDM E/R cover E |
![]() |
IPDM E/R cover bracket | ||||
![]() |
: Pawl |
Removal and Installation
REMOVAL
Disconnect the battery cable from the negative terminal.
Disengage the fixing pawl on the vehicle front side of the IPDM E/R cover A and then pull up IPDM E/R cover A.

![]() |
: Pawl |
Disengage the fixing pawls on the vehicle rear side of the IPDM E/R cover A and then remove IPDM E/R cover A.

![]() |
: Pawl |
Disengage the fixing pawls and then pull up IPDM E/R.

![]() |
: Pawl |
Disconnect the IPDM E/R harness connector and then remove IPDM E/R from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to perform ADDITIONAL SERVICE WHEN REPLACING IPDM E/R when replacing IPDM E/R. Or not doing so, IPDM E/R control function does not operate normally. Refer to Description.
Other materials
Configuration
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the ABS actuator and electric unit (control unit).The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then ...
Back Door Opener Switch
Description
Automatic back door open/close function does not operate using back door opener switch.
Diagnosis Procedure
CHECK AUTO OPEN/CLOSE FUNCTION
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Diagnosi ...
Combination Meter
Removal and Installation
CAUTION:
When replacing the combination meter, always replace it with a new one. The functions controlled by the combination meter does not operate properly in case of reuse of the combination meter from another vehicle.
Be sure to perform the configuration when replacin ...







