NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Curtain Air Bag Module

Nissan Armada 2025-2026 Service and Repair Manual / Restraints / Srs Airbag / Curtain Air Bag Module

Exploded View

Curtain airbag module        
: N·m (kg-m, ft-lb)

Removal and Installation

WARNING:

Always observe the following items for preventing accidental activation.

  • Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.

  • Always work from the side of air bag module. Never work in front of it.

  • Never use air tools or electric tools for servicing.

REMOVAL

Remove headlining assembly. Refer to Removal and Installation.

Disconnect curtain air bag module harness connectors and .

: vehicle front

CAUTION:

  • Never damage harness connector.

  • Insert remover tool (A) wrapped in tape between connector and lever , and then disconnect harness connector while moving the lever.

Remove curtain air bag module mounting bolts.

Remove bracket part of curtain air bag module from vehicle, and then remove curtain air bag module.

CAUTION:

  • To prevent damage to the parts, never impact the curtain air bag module.

  • Replace curtain air bag module if it is dropped or sustains an impact.

  • To prevent accidental explosion, never insert any foreign objects (screwdriver, etc.) into the curtain air bag module.

  • To prevent accidental explosion, never disassemble the curtain air bag module.

  • To prevent accidental explosion, never expose the curtain air bag module to temperatures of more than 90°C (194°F).

  • To prevent damage to the parts, never allow oil, grease, detergent, or water to come in contact with the curtain air bag module.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • When installing, tighten mounting bolts according to numerical order as shown in figure.

    : Left side
    : Right side

  • Never damage the harness while installing.

  • When connect curtain air bag harness connector, press harness connector until clicking sound.

  • After installing the connector, check that the lock is pushed securely into it.

  • After installation is completed, perform self-diagnosis using CONSULT and confirm if the system is normal. Refer to Work Flow.

  • After the work is completed, check that no system malfunction is detected by air bag warning lamp.

    Other materials

    Seat Belt Safety Precautions
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...

    Front Door Pocket Lamp
    Exploded View Front door pocket lamp is integrated structure with front door finisher. For exploded view of front door finisher, refer to Exploded View. Replacement CAUTION: Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric ...

    The Meter Speaker Does Not Sound
    Diagnosis Procedure The meter speaker does not sound.CHECK COMBINATION METER INPUT SIGNAL Select the “Data Monitor” for the “Combination meter” and check the “BUZZER” monitor value. “BUZZER”   Under the condition of speaker input : On Other than the above : Off Is ...