Diagnosis Procedure
The meter speaker does not sound.
CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “Combination meter” and check the “BUZZER” monitor value.
| “BUZZER” | |
| Under the condition of speaker input | : On |
| Other than the above | : Off |
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace BCM. Refer to Removal and Installation.
CHECK METER SPEAKER CIRCUIT
Check meter speaker circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
Other materials
Evap Canister
Exploded View
Vent hose 1
Canister filter
Bracket 3
EVAP canister
Vent hose 2
Bracket 1
Vent hose 3
EVAP canister vent control valve
Clip
EVAP control system pressure sensor
Bracket 2
Vent hose 4
Clamp
To fuel tank. Refer to F ...
Rear Door Glass
Removal and Installation
REMOVALCAUTION:
Never damage rear door glass and rear door panel.Remove rear door glass run. Refer to Removal and Installation.
Remove rear door lower sash upper and rear door lower sash lower. Refer to Removal and Installation.
Remove hole seal 1 from rear door panel.
Re ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...