Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis and Repair Workflow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of ”SONAR” using CONSULT. Refer to CONSULT Func ...
Other materials:
Work Procedure
BEFORE REPLACEMENT
Perform control unit information saving procedure before replacing 8CH CAN gateway
NOTE:
It is necessary to save the control unit information to CONSULT to migrate the 8CH CAN gateway data after replacing. Refer to CONSULT manual for detail.
SAVING CONTROL UNIT INFORMATION
With CO ...
Intelligent Key System All Functions Cannot Operate (all Keys)
Intelligent Key system all functions cannot operate (door lock and engine start).
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
Door lock operation (remote keyless entry) Door lock operation (one touch sensor or request switch of front/rear/back door) or trunk/back door open operati ...
How to Erase Pearmanent Dtc
WHEN A DTC IS STORED IN TCM
When a DTC is stored in TCM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw.
NOTE:
The following timing chart is for DTC of two trip detection diag ...
0.0053