CHECK DTC OF TRANSFER CONTROL UNIT
With CONSULT
Ignition switch ON.
Perform self-diagnosis for “AWD/4WD”.
Is any DTC detected?
YES >>Check DTC detected item. Refer to DTC Index.
NO>>GO TO 2.
CHECK 4WD SHIFT INDICATOR
Check 4WD shift indicator function. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Proceed to diagnosis procedure. Refer to Diagnosis Procedure.
CHECK 4WD SHIFT SWITCH FUNCTION (CHECK DTC OF CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for "CHASSIS CONTROL".
Is any DTC detected?
YES>>Check DTC detected item. Refer to DTC Index.
NO>>Work Flow
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments; Refer to Diagnostic Worksheet. This infor ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Basic information
CAMERA/
button
WARNING
Improper use of the Nissan Armada Intelligent Around View Monitor system
may result in serious injury or even fatal accidents. Always follow all safety
instructions carefully.
The Nissan Armada Intelligent Around View Monitor is intended as a driver ...