CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>GO TO 2.
NO>>Refer to Diagnosis Procedure.
CHECK LIFTING SENSOR
Check lifting sensor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Seat Lifting
Lumbar SupportRemoval and Installation
CAUTION:
REMOVAL
Remove passenger knee air bag module mounting bolts, and then move passenger knee air bag module to secure workspace. Refer to Removal and Installation.
Disconnect harness connector.
Remove fixing clip , and then remove front foot lamp bracket (RH).
Disengage front foot lamp (RH) ...
Hooks and Other Tools
(1) HOOKS
Unlike clamps which grab an object, hooks are curved tools that pull on the body. When a hook is used, it must be set so that the point where the body is pulled and the position of the hook's chain are lined up straight.
When a hook is used, a piece of wood, etc. should be inserted betwee ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...