Nissan Armada 2025-2026 Service and Repair Manual: Hooks and Other Tools
(1) HOOKS
Unlike clamps which grab an object, hooks are curved tools that pull on the body. When a hook is used, it must be set so that the point where the body is pulled and the position of the hook's chain are lined up straight.
When a hook is used, a piece of wood, etc. should be inserted between the hook and body in order to prevent damage to the body.
(2) SPECIFIC-USE PULLING TOOL
Specific-use pulling tools are special jigs which are used to repair a specific part of the vehicle.
An example of a specific-use pulling tools, a strut puller, is shown in the figure.
Clamps
Generally speaking, when a body has to be straightened, the pulling device and the body must be attached to each other and the body itself must remain stationary. For this purpose, various clamps are ...
High Intensity Cabin Structure
In recent years, the body construction of vehicles is changing for the purpose of protecting passengers at the time of the collision.
A greater use of high strength sheet steel reinforcements and the ...
Other materials:
Symptom Table
Symptom Possible causeInspection itemAll function does not operateFuseFront seat pneumatic control unit power supply/ground circuit
Check power supply and ground circuit (front seat pneumatic control unit)
Driver seat pneumatic control unit: Refer to Diagnosis Procedure.Passenger seat pneumatic con ...
Disassembly & Assembly
DISASSEMBLY
Without Dynamic Digital Suspension and Electronic Air Suspension
CAUTION:
Never damage shock absorber piston rod when removing components from shock absorber.
Install shock absorber attachment [SST: ST35652000 ( − )] (A) to shock absorber and secure it in a vise.
CAUTION:
When in ...
BSW system operation
Side indicator light
BSW indicator (vehicle information display)
Vehicle information display
Steering-wheel-mounted controls (right side)
The Nissan Armada BSW system becomes active at speeds above approximately 20
MPH (32 km/h), ensuring effective operation during typical driving ...
0.0061