Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure
CHECK REAR POWER WINDOW MOTOR LH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window motor LH power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace rear power window motor LH. Refer to Disassembly and Assembly.
NO>>Repair or replace the malfunctioning parts.
Other materials:
MIG Welding
MIG is the abbreviation for metal inert gas shielded arc welding. MIG welding has the following special features.
(1) NORMAL MIG WELDING
MIG welding is the most commonly used welding method. As shown in the figure, a wire serving as an electrode is continuously fed into the welding area, and an arc ...
Work Procedure
CHOOSE METHOD
There are two ways of initialization method.
Which method do you choose?
With CONSULT>>
GO TO 2.
Without CONSULT>>
GO TO 3.
WITH CONSULT
With CONSULT
Ignition switch ON.Perform "Third seat LH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSUL ...
Removal and Installation
WARNING:
REMOVAL
Turn the ignition switch ON.
CAUTION:
Never start the engine.
Release the parking brake.
CAUTION:
If the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
Turn the ignition switch OFF.
Disconnect 12V battery negative terminal. Refer to Removal and Instal ...
0.0051