CHOOSE METHOD
There are two ways of initialization method.
Which method do you choose?
With CONSULT>>GO TO 2.
Without CONSULT>>GO TO 3.
WITH CONSULT
With CONSULT
GO TO 4.
WITHOUT CONSULT
Without CONSULT
GO TO 4.
CHECK THE FUNCTION
Check that manual function and folding function operates normally.
>>WORK END
Third Seat Lh Position InitializationRemoval and Installation
CAUTION:
Always work with 2 workers, because it is heavy weight.
REMOVAL
Remove headrest.
Slide second seat to front most position.
Disengage fixing pawls using a remover tool (A) according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove center rail finisher (LH ...
Draining
WARNING:
Start the engine and let it run to warm up transmission.
Stop the engine.
Lift up the vehicle.
When the oil pan positioning mark is difficult to find, mark it with paint or like beforehand.
Remove the drain plug to allow fluid to drain using OFT position change wrench (SST: NI-52972–2) ...
How to enable/disable the I-BSI system
Example
ProPILOT Assist switch (design may vary depending on the Nissan Armada model)
Vehicle information display
Steering-wheel-mounted control (right side)
To configure the Nissan Armada Intelligent Blind Spot Intervention (I-BSI) system,
follow these steps:
1. Press the
butt ...