CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace power window main switch. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Diagnosis Procedure
CHECK AUTO OPEN/CLOSE FUNCTION
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK AUTOMATIC BACK DOOR CLOSE SWITCH
Check automatic back door close switch.
Refer to Component Function ...
Removal and Installation
REMOVAL
Folding the seatback of third seat.
NOTE:
If seatback of third seat cannot be folded, access the third seat control unit from the front side of third seat.
Remove third seat control unit fixing screws and then remove third seat control unit.
Disconnect third seat control unit connector a ...
Calibration of Decel G Sensor
TCM stores calibration data (inherent characteristic value) of decel G sensor to provide accurate control.
Decel G sensor calibration must be performed when the following operation is performed. For work procedure, refer to Work Procedure.
Removing/Installing yaw rate/side/decel G sensor
Replacing y ...