CHECK STOP LAMP INPUT/OUTPUT SIGNAL CIRCUIT
Check stop lamp input/output signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace trailer brake control unit. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Rear height sensor :Vehicle front :N·m (kg-m, ft-lb) :N·m (kg-m, in-lb) ...
I-FCW system limitations
Illustration A
Illustration B
Illustration C
Illustration D
WARNING
The following limitations apply to the Nissan Armada I-FCW system. Ignoring
these limitations may result in serious injury or fatal accidents.
The Nissan Armada I-FCW system cannot detect every object or v ...