CHECK AUTO ANTI-DAZZLING INSIDE MIRROR POWER SUPPLY AND GROUND CIRCUIT
Check auto anti-dazzling inside mirror power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK AUTO ANTI-DAZZLING MIRROR CIRCUIT
Check auto anti-dazzling mirror circuit. Refer to Diagnosis Procedure.
Confirm the operation after replacement.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 3.
REPLACE AUTO ANTI-DAZZLING INSIDE MIRROR
Replace auto anti-dazzling inside mirror. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Exploded View
Rear room lamp bracket Headlining assembly Rear room lamp : Pawl : Vehicle front ...
Removal and Installation
REMOVAL
Remove rear bumper fascia. Refer to Removal and Installation.
Remove bracket cover fixing screws, and then remove bracket cover.
Disconnect hands free sensor harness connectors.
Remove hands free control unit fixing screws, and then remove hands free control unit.
Remove hands free sensor up ...
Service
Never use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.
For approximately 3 minutes after the cables are removed, it is still possible for th ...