Location of Plastic PartsRemoval & Installation
REMOVAL
NOTE:
The mass airflow sensor can be removed while still installed on the air cleaner cover.
Pinch the clip on the air cleaner cover to release the lock, and remove the air cleaner cover.
: Vehicle front
Remove air cleaner filter from air cleaner body .
: Vehicle front
INSTALLAT ...
Removal and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect front camera unit harness connector.
Release pawls of bracket, and remove front camera unit from bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not touch or shock the driver assist ...
Inspection and Repair
INSPECTION
When measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage ...